Gutter & Downspout Sizing Calculator
Size your gutters and count your downspouts the way sheet-metal pros do: roof area, pitch and the 5-minute rainfall rate a 10-year storm brings to your area.
A real person answers. Free estimate, no obligation.
Data: NOAA Atlas 14 point precipitation frequency (5-minute, 10-year) · Method: SMACNA roof-area gutter sizing · Updated September 2026
How gutter sizing works
Effective roof area
Start with the roof footprint, the length times width of the house as seen from above. A steeper roof catches wind-driven rain and sheds it faster, so the footprint is multiplied by a pitch factor: 1.0 for a low slope, up to 1.3 for a 12:12 roof.
Local rainfall intensity
Gutters are sized for the worst short burst, not a whole day of rain. The standard figure is the 5-minute rainfall rate of a 10-year storm, in inches per hour, from NOAA Atlas 14. It runs from about 3 inches per hour on the Pacific coast to 10 or more on the Gulf Coast. On a town page the tool uses that town’s own Atlas 14 value.
Matching gutters and downspouts
In the SMACNA roof-area method a 5-inch K-style gutter handles about 5,500 square feet of roof at 1 inch per hour and a 6-inch about 8,000, so the effective area times the rainfall rate tells you which one fits. A 2 by 3 inch downspout handles about 600 square feet of roof in an 8 inch per hour cloudburst and a 3 by 4 about twice that; the tool scales those with your rate and adds a downspout at least every 35 feet of gutter.
What the tool assumes
A simple roof that drains to two eave-side gutters, each with the same share of the roof. Valleys, dormers, an inside corner where two roofs meet, or a section that drains onto a lower roof all concentrate water and need a pro’s eye.
Common questions
Most modest homes in moderate-rain areas work with 5-inch K-style gutters. Large roofs, steep pitches and heavy-rain regions like the Gulf Coast, Florida and the Plains push toward 6-inch, which carries about 40 percent more water and takes the larger 3 by 4 downspouts.
At least one every 30 to 40 feet of gutter, and more when the roof area or the rainfall rate is high. A typical 40 by 30 foot house ends up with four: one near each corner.
Those are the inside dimensions in inches of the two common rectangular downspouts. A 3 by 4 carries roughly twice the water of a 2 by 3 and clogs less, which is why pros pair it with 6-inch gutters and use it in heavy-rain areas even on 5-inch gutters.
A steep roof sheds water faster and catches more wind-driven rain, so it delivers water to the gutter in a harder rush. The pitch factor accounts for that; on very steep roofs water can also overshoot the gutter, which a pro handles with the hanging height, a drip edge or splash guards.
The 5-minute rate of a 10-year storm in inches per hour. NOAA Atlas 14 publishes it for any address. Town pages on this site use their own value; the standalone tool offers typical values by region.
Get an exact answer from a local pro
Free to call — get connected with a local pro in your area.
Tap to Call(855) 321-3426disclaimer: Plumbers of Iowa is a free service to assist homeowners in connecting with local service providers. All contractors/providers are independent and Plumbers of Iowa does not warrant or guarantee any work performed. It is the responsibility of the homeowner to verify that the hired contractor furnishes the necessary license and insurance required for the work being performed. All persons depicted in a photo or video are actors or models and not contractors listed on Plumbers of Iowa.
Same-day and 24/7 emergency services are subject to provider participation, location, technician availability, and demand. Availability is not guaranteed and may vary by market and appointment capacity.
We use cookies and session-based analytics, including session replays (with form inputs masked), to improve this site. See our Privacy Policy.
About · Contact · Privacy · Terms · Disclosure · Sitemap
© 2026 Plumbers of Iowa. All rights reserved.